
Displaying items by tag: ground granulated blast furnace slag
Ecocem France orders Loesche mill for Dunkirk plant
07 November 2016France: Ecocem France has ordered a Loesche type LM 46.2+2 CS mill for a slag cement grinding plant that it is building in Dunkirk. It follows a previous order by Ecocem of a LM 46.2+2 CS mill for the dry grinding of ground granulated blast furnace slag (GGBFS) at its plant at Fos-sur-Mer.
The LM 46.2+2 CS for the plant in Dunkirk is designed for the grinding of cement clinker and granulated blast furnace slag at a capacity of 105t/hr GGBFS. The gearbox will have a capacity of 3150kW.
All the mechanical equipment for the grinding plant starting from mill feed to the product discharge into the product silos is included in the Loesche scope of supply. The Loma heater type LF 28-L will be a full-inlined type designed to burn natural gas as well as blast furnace gas. The burner supplied by Loesche will be the MSBZ type, complete with fitting rack and local switch cabinet.
The lead-time for the main components of the mill and for the additional units included in the scope of supply is 6 to 13 months. The commissioning of the vertical roller mill is planned for the middle of 2017.
Ecocem’s grinding plant will be installed close to Arcelor steelworks for use of their granulated blast furnace slag. This LM 46.2+2 CS will be the seventh Loesche vertical roller mill installation for slag and cement grinding in France.
Indonesia: PT Krakatau Semen Indonesia has ordered a slag grinding mill from Loesche for its Cigading grinding plant in Cilegon, Banten. Krakatau Semen will use a Loesche mill with an LDC classifier to grind ground granulated blast furnace slag to a fineness of 4500cm²/g. The scope of supply for this contract also includes the raw material transport system, the mill dust extraction system, the reject system and the silo equipment. The mill is scheduled for operation by the first quarter of 2017.
Subsidiaries of Loesche are participating in the contract. Loesche ThermoProzesstechnik is supplying the grinding plant with a hot gas generator type LF-36L (fully inline) for the combustion of industrial diesel oil. Automation of the plant is supplied by Loesche Automatisierungstechnik. Loesche Indonesia will provide a service contract including personnel services. In addition, Loesche will monitor the local production as well as the assembly and commissioning.
PT Krakatau Semen Indonesia was founded in November 2013 as a state-run company. In a joint venture with PT Semen Indonesia, PT Krakatau Semen Indonesia is building its first plant of this type with a planned production of 0.75Mt/yr.
India: Tata Steel has launched a new ground granulated blast furnace slag product in Bhubaneswar, Odisha. Around 40 potential customers from the construction, ready-mix concrete and engineering sectors attended the launch event. Speakers at the event included Rashid Merchant from RMC India Readymix and PN OJha from the National Council for Cement and Building Materials (NCCBM). Other senior officials from Tata Steel were also in attendance.
Indonesia: Krakatau Semen is set to start producing ground granulated blast furnace slag (GBFS) at its Cilegon plant by December 2016. The joint venture between Krakatau Steel and Semen Indonesia is due to produce 300,000t/yr of slag powder, according to Bisnis Indonesia. The company has invested US$36m into building the plant. Construction started in 2014.
JSW Cement plans cement and slag grinding plant
07 March 2016India: JSW Cement started building a 2.4Mt/yr cement grinding plant in January 2016 at Salboni in West Bengal. The US$119m plant will produce both Portland slag cement and ground granulated blast furnace slag (GGBS). It is planned to be finished in the first quarter of 2017. Environmental clearance for the project was granted in mid-January 2016.
Raw materials for the grinding plant include 0.74 – 095Mt/yr of slag and 1.50 – 1.76Mt/yr of clinker. The slag will be sourced from Tata Steel and the Steel Authority of India. Originally the site was intended for a 10Mt/yr steel plant, according to local media.
Ferrous slag market forecast to rise by 1.6% to 2025
04 December 2015World: The ferrous slag market in 2014 was worth an estimated US$30bn. It is forecast to grow by 1.6% to US$36bn by 2025, according to a new report from Smithers Apex.
'The Future of Ferrous Slag to 2025' examines the factors affecting ferrous slag production to provide a basis for forecasting the quantities likely to be produced up to the year 2025. It looks at current and possible future applications of slag and describes the trends in regulations affecting the market.
The current potential market supply of blast furnace slag is estimated to be 447Mt, of which almost 295 – 300Mt is granulated blast furnace slag (GBS). The making of steel from blast furnace iron through oxygen conversion (or basic oxygen furnace, BOF) contributes a further 140 – 145Mt of slag and the alternative route to steelmaking through electric arc furnaces (EAF) supplies more than 50Mt.
According to the report, the total output of ferrous slag is expected to increase only slowly, or to stagnate and decline marginally, because EAF steelmaking capacity is expected to grow faster than BF-BOF steelmaking capacity. This effect can already be seen in the US, where the tonnage of steel produced by EAF plants overtook the tonnage produced by BF-BOF plants in the 1990s. Since then, further decline in BF-BOF output has led US-cement and aggregate companies to start importing slag and to invest in new coastal slag treatment installations dependent entirely on imported supplies.
Changes in the Chinese steel industry will contribute substantially to this rising share of EAF steel in world supply. China produces half of world crude steel and BF-BOF steelworks account for over 80% of China's steel output. The Chinese government is campaigning to replace small and inefficient steelworks with EAF installations.
In the current market, it is estimated that total production of ferrous slag of all types amounts to US$24.5bn. While it is possible that supply will increase only slowly, if at all, there is growing demand for slag products, which is likely to ensure that the value per tonne of slag products will increase. The growth in demand has been accelerated by environmental legislation and by direct intervention from governments and international bodies.
Demand for slag products has been affected by market cycles. The collapse of construction activity in Europe, as a consequence of the financial crisis, reduced sales of slag for cement and aggregate use. Over the medium term, there is every prospect that demand will outrun supply. Currently GGBS meets only an estimated 17% of global cement supply. Slag products as aggregate substitutes meet only 1 - 1.5% of total demand.
Francis Flower acquires Scunthorpe ground granulated blast furnace slag plant from Hanson
04 August 2015UK: Mineral resources company Francis Flower has announced the acquisition of the Scunthorpe ground granulated blast furnace slag (GGBS) plant from Hanson Cement.
The business is capable of producing more than 500,000t/yr of GGBS and supplies customers in the Midlands and north of England. GGBS complements Francis Flower's existing range of high quality powdered minerals, which originate as by-products from various industries. This reduces the need for mineral extraction and landfill, delivering sustainable environmental solutions for its customers. The acquisition reflects both Francis Flower's commitment to developing its range of products and services in this sector and the credibility it has for making the most of mineral resources.
"We are absolutely delighted and very excited to announce this new acquisition. GGBS is an excellent fit to our existing product range and will help further our longstanding relationships in this sector," said Adrian Willmott, Chairman and CEO of Francis Flower. "We have a proven track record of making the most of mineral resources, reducing the need for mineral extraction as well as landfill and delivering sustainable solutions for our customers. We are very much looking forward to working with the team in Scunthorpe and developing the opportunities in the GGBS market as the UK construction sector continues to grow."